Treatex Hardwax Oil - Ultra Natural
Suitable for: Internal use
Recommended timbers: Lighter coloured timbers e.g. Oak, Ash, Beech, Birch, Maple, Sycamore etc.
Applications: Floors, doors, stairs, worktops, woodturning etc.
Natural Hardwax Oil contains a small amount of white pigment which allows it to be used in two different ways:
1. Base coat:
If you prefer to protect light timbers whilst changing the unfinished colour as little as possible then Treatex Hardwax Oil Ultra Natural can be applied as a base coat underneath two coats of Treatex Clear Hardwax Oil Ultra to neutralise the warming effect.
2. Top coat:
For a purer white, seal Spruce Colour Tone with two coats of Hardwax Oil Ultra Natural. When Treatex Clear Hardwax Oil is applied on top of our Spruce Colour Tone it can have a slight yellowing effect on the colour.
Please Note! Hardwax Oil Natural is not a complete finish in its own right and should either be treated with 2 coats of Hardwax Oil Ultra Clear or should applied as 2 coats over Spruce Colour tone.
Coverage 1L will cover approximately 25m² in one coat depending on the timber and method of application. 2.5L will cover approximately 50m² in one coat depending on the timber and method of application.