Osmo Polyx Oil Clear Satin Matt 3032
For all interior wooden floors. Also very well suited for cork and OSB (oriented strandboard) floors, terracotta and other unglazed tiles.
For dark hardwood floors like Jatoba, Meranti, Wengé, Merbau, etc. use Osmo Wood Wax Finish No. 1001 Clear Extra Thin (Trial application recommended).
Osmo Polyx®-Oil can also be used to advantage on wooden furniture, table tops etc.
Number of coats required
2 (no primer)
Renovation: 1 coat
The wood, cork or OSB surface must be clean and dry (maximum moisture content 20 %).
Small dents and holes in the wood can be filled with Osmo Woodfiller. Only apply on frost free surface. Clean or lightly sand old micro-porous finishes.
Remove old varnishes (with Osmo Paint Remover or by sanding).
If required, sand with fine grain before application (grain max. 150), remove dust carefully.
For wood tending to attract blue stain in moist surroundings (e.g. pine) a pre-treatment (all sides if possible) with biocide-free wax impregnation Osmo Wood Protector is recommended.