Tormek T8 Sharpening System with Free TC 800 Case
Tormek T-8 sharpening system with FREE TC 800 Case
The Tormek TC-800 case is a purpose-made case for Tormek jigs and accessories. It is stackable and tough, has a leather handle and transparent sliding lid, the perfect accessory to stay organised. Get one free with every Tormek T-8 Original - the original sharpening system.
The Tormek T-8 sharpening system is the perfect answer to your sharpening requirements. For any professional or amateur needing a versatile, reliable and repeatable sharpening system, the T-8 should be on the top of your list. The T-8 has a 250mm x 50mm water-cooled grindstone and a 220mm x 31mm leather tyred honing wheel. Powered by a quiet 200W motor, Tormek’s unique and efficient drive system maintains constant speed, even under load. Tools can be sharpened with the Supergrind wheel cutting towards or away from the edge. The T-8 features a strong, cast-alloy casing. The mounting sleeves for the universal support are an integral part of the casting. The design eliminates the possibility of any misalignment between the universal support and the grinding wheel. The universal support bar has a micro-adjuster, which makes setting up or replicating a sharpening angle easy and highly accurate.
The Advanced Water Trough features a screw lift mechanism. You can fit it, fill it and then by simply turning the knob, raise the trough to bring the water into contact with the stone. It makes removing the trough for emptying just as simple. The T-8 includes a magnetic scraper for efficient cleaning. The unit has an NVR safety switch with a strong waterproof cover. The T-8 is suitable for use in education and other areas where an NVR switch is a necessity. The T-8 includes TT-50 Truing and Dressing Tool, SP-650 Stone Grader, WM-200 Angle Setting Guide, PA-70 Honing Paste and Dressing Oil for the honing wheel. In addition, there is a comprehensive handbook and Tormek DVD all packed in a strong storage tray. The T-8 also includes the SE-77 upgraded jig for square edge tools. Its design has a movable side and fine adjustment. This ensures a precise 90° angle between your blade’s edge and side. It also offers the possibility to create a slightly cambered edge. The Tormek wet-grinding method leaves a polished, burr-free edge without overheating the tool. Wet grinding significantly extends the life of your tools; it removes less material without affecting the temper of the steel.
New 8-year warranty (5+3) Introducing the new Tormek T-8 extended warranty of 5 years + 3 extra years upon registration.
- New modern design
- SE-77 makes square grinding easy
- Trough setting 1000% easier
- Trough cleaning 1000% smarter
- Oil included to set up leather wheel
- Alloy frame means it is the most accurate Tormek ever
- Steel plate makes angle setter storage easy
- Lighter frame for easier stowing
Included with the Tormek T-8 system:
- SE-77 Square Edge Jig
- TT-50 Truing Tool
- SP-650 Stone Grader
- WM-200 AngleMaster
- PA-70 Honing Compound
- Tormek Handbook and DVD
7 year warranty
Width: 270 mm (10 5/8”)
Depth: 270 mm (10 5/8”)
Height: 330 mm (12”)
Shipping weight 17,8 kg (39 lbs)
Machine only 14.8 kg (32.6 lbs)
Tormek Original Grindstone
SG-250, Aluminium oxide
dia. 250 x 50 mm (10” x 2”)
90 rpm, torque 14.7 Nm
Leather Honing Wheel
dia. 220 × 31 mm (8 5/8” x 1¼”)
Stainless steel main shaft,
stone hardware and EzyLock.
Zinc cast top and frame.
Sides in ABS plastic.
Industrial single phase
200 W (input) 230 V, 50 Hz or 115 V, 60 Hz,
Continuous duty, Maintenance free
Silent running, 54 dB
25,000 hour life