Killinger Wood Turning Lathe KM1500 SE
Product code: KM1500SE swivel
Professional Quality Woodturning Lathe
This lathe will not disappoint with full cast iron headstock, tailstock, and lathe bed. Legs weigh approximately 60 kg each, total lathe weight approximately 240 kg to control vibration. Standard centre distance 1,100mm. Centre height 200mm, turning diameter 400mm. This lathe is fully assembled on legs and ready to use. Comes with electronic variable speed control and emergency stop unit with magnetic backing, it can be mounted conveniently along the lathe to control the rpm.
- Heavy duty cast construction
- Total weight approximately 240 kg
- Infinitely variable seed 40 to ,025 rpm with 3 step pulleys
- Centre height 200mm turning diameter 400mm. 460mm if headstock is swivelled out.
- Magnetic mobile control unit
- 350mm long cast tool rest 30mm stem
- Zero-point adjustment for perfect alignment of drive and tail centres
- Convenient tool tray positioned under the lathe bad with rubber matt
- Maintenance free bearings
- Swivelling and sliding headstock
- Integrated indexing with 36 divisions
- Digital speed display
- Forward and revers
- Spindle thread M 33
- 2 hp/ 1,5 kW, 230 V
Cast iron lathe bed ground and ribbed, headstock and tailstock from cast iron sturdy legs each approx. ca. 60 kg, with transport handles, total weight approx. 240 kg Standard distance 1.100 mm, extension with short bed 450 mm or with 2. bed and pair of feet up to 2.600 mm Lathe completely mounted, ready to use, simple to dismount.
Safety-
- Security locking ring at spindle optional to secure chucks if spindle turns reverse - Emergency off button centrically positioned at headstock - Zero-point-Adjustment at headstock for an exact alignment of tips no need to use a double-cone
- Outrigger (optional) can be fixed simple within minutes, positionable in every position lengthways at lathe bed, no need of several fixing points The cranked, sturdy construction has an integrated supporting column to avoid vibrations if turning heavy parts
Technical Data
- Centre distance 1.100 mm - Centre height 200 mm - Turning diam. 400 mm resp. 660 mm with outrigger and 460 mm if headstock is swivelled to ergonomical position - Headstock infinitely swivelling and sliding along the bed - 6 fixing positions 0-270 ° - Exact "Zero-Point-Adjustment" at headstock - Hollow spindle M 33/inner cone MT 2/Bo=10 mm, ground with large-sized maintenance free bearings - Tailstock quill MT 2 ground, with laser scale, self- ejecting of live centre - Three phase motor 2 hp/1,5 kW, electric mains 230 V/ 1ph
- Spindle speed infinitely variable 40 - 3.025 rpm/min. (3 steps) - Digital display for rpm, variable positioning of control board with all functions spindle forward/reverse, on-off-button
- Integrated indexing with 36 divisions - Sturdy cast iron tool support, tool rest from low-wear steel cast
Standard accessories
- Emergency off button at headstock, mobile box with magnet - zero-point-adjustment at headstock - tool rest support cast iron, bo=30 mm - tool rest steel-cast 350 mm, stem D=30 mm with adjusting ring - 4-prong mandrel MT 2/D=25 mm - live centre MT 2/60° - tool box with rubber matt
Weight/Dimensions
Weight at 1.100 mm centre distance 240 kg Dimensions (LxWxH) ca. 1.900x600x1.250 mm CE-conform, subject to change without alteration
