Chestnut Products Cellulose Sanding Sealer
A quick drying sealer which provides an excellent base for all Chestnut Products’ finishes which require the use of a sealer. It will seal open pores of timber prior to application of lacquers, waxes or polishes. Once dry lightly sand for a smooth surface. Can be applied by brush, cloth or spray, drying time is about five minutes under normal conditions. It can be used as a basecoat for Melamine Lacquer, Acrylic Gloss Lacquer, Acrylic Lacquer, Ebonising Lacquer, Acrylic Satin Lacquer, WoodWax 22, Woodturner’s Stick Wax, and Friction Polish.
Coverage approximately 8-10 m² per litre.
- Quick drying
- Stain can be added
One coat should be sufficient to seal the piece you are working on. It is not advisable to apply more than one coat, especially when using a hard top-coat i.e. lacquers. This product can be tinted using Spirit Stain. Up to 10% of stain can be added to the sealer
Highly Flammable. This formula does not contain harmful solvents (such as toluene and xylene) but should still be used in a well ventilated place. (see Safety Data Sheet or warnings on can for full details).