Environmentally friendly, free from chlorinated hyrdrocarbons and biologically decomposable. Complies with OECD norm. Easy to use can be applied with a brush or with a paint scraper
Available in 750 ml tin.
Application:
Furniture:
Apply generously. If very thick coats have to be removed
allow to soak in overnight, covered with foil.
Remove with a paint scraper, clean with water and brush.
Veneered furniture clean again with thinner.
Plastic coatings and similar:
Brush on well – if necessary apply again after 2 -3 hours
– wet-on-wet – until the coat is deeply penetrated.
In case of windy weather cover with plastic foil – just press
the foil onto the paint remover.
Window frames and doors:
Apply in warm weather if possible (may take longer in
cool conditions).
Extremely smooth, glossy surfaces sand down first with
coarse sandpaper.
If only the upper coats are coming off, remove with a
paint scraper; brush on paint remover again. Wash off.
Osmo Paint Remover does not contain wax, therefore it
will not obstruct the adhesion of coats applied hereafte
