From the Anvil Beeswax Hook & Band Hinge 24inch (Pair)
(for internal use)
Fixing Plate: 6 1/2” x 2” (Pin Diameter: 3/4’’) Hinge Arm: 22 1/2”
A fine example of the blacksmiths craftsmanship. The evidence of the hand beaten metal is shown to its full on the faceted surface.
Supplied with screw on plate. It is a masterpiece of blacksmithing for very heavy internal doors. The frame hook can be morticed into the frame, making the door in-line with the frame.
Alternatively the spike pin 33190 can be purchased separately for fixing applications.
To get the band in line with the frame of the door the hook plate must be chiselled in flush (making it a stronger fixing).
Sold in pairs and supplied with the necessary fixing screws.
All products with this finish are treated with a special wax imparting subtle matt richness to the metal. This gives excellent protection where products are fitted internally and maintained. Sometimes because of temperature changes your product might have a slight white bloom. We recommend you polish it with a soft cloth, this will restore the finish. However, mild steel or malleable iron, which are the two materials we forge, when fitted in damp bathrooms or wet properties, have the potential to exhibit surface rust. In these situations we recommend an application of maintenance wax. Please make sure plaster is fully dry before fitting ironmongery.